Question 1069 of 731 · Texas Journeyman Electrician Exam
An insulation resistance tester (megohmmeter or megger) checks insulation by:
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 1069
- A: Applying a high DC test voltage and reading resistance in megohms
Explanation
A megohmmeter applies a high DC voltage, commonly 500 or 1,000 V, between conductors or to ground and displays the leakage resistance in megohms. It is used on de-energized equipment.
More questions: Definitions, Theory and Plans
- 1070An electrician places a clamp-on ammeter around both the hot and neutral conductors of a single-phase, two-wire circuit carrying a load. The meter will read:
- 1071How must a voltmeter be connected to measure the voltage across a load?
- 1072Why must an ohmmeter be used only on a de-energized circuit?
- 1073Which instrument directly measures true power in watts?
- 1074A floor plan is drawn at a scale of 1/4 inch = 1 foot. A conduit run measures 6 inches on the drawing. How long is the actual run?
- 1075On an electrical floor plan, a small circle with two short parallel lines through it typically represents: