Question 4112 of 731 · Texas Journeyman Electrician Exam
A white conductor in a cable assembly is used as an ungrounded conductor for a switch loop. What does the NEC require?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 4112
- B: Permanent reidentification at each location where it is visible
Explanation
200.7(C) permits a white or gray insulated conductor in a cable to be used as an ungrounded conductor only if it is permanently reidentified, such as by marking tape or paint, at each location where it is visible and accessible. For switch loops it must also be used as the supply to the switch, not the return.
More questions: Branch Circuits, GFCI and AFCI
- 4001In a dwelling unit, GFCI protection is required for all 125-volt through 250-volt receptacles installed in which of the following locations?
- 4002A receptacle in a dwelling unit bedroom is installed 5 ft from the top inside edge of the bowl of a bar sink. Is GFCI protection required?
- 4003In a dwelling unit, receptacles within what distance of the outside edge of a bathtub or shower stall require GFCI protection?
- 4009A dwelling has a fully finished basement used as a recreation room. Do the 125-volt receptacles in this finished basement require GFCI protection?
- 4010A single 125-volt receptacle in an attached dwelling garage is dedicated to a chest freezer. Is GFCI protection required?
- 4013Where must a GFCI device that provides the protection required by 210.8 be located?