Question 10071 of 850 · Texas Journeyman Electrician Exam
Under NEC 2026, an emergency disconnect device for permanently connected EVSE at locations other than one- and two-family dwellings must be installed within what distance range from the equipment?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 10071
- B: Not less than 20 ft and not more than 100 ft, and in sight
Explanation
NEC 2026 625.43(D) requires an emergency disconnect for permanently connected EVSE outside one- and two-family dwellings. It must be readily accessible, at least 20 ft but not more than 100 ft from the equipment, within sight, and of manual reset type.
More questions: Special Equipment, Pools, PV and EV
- 10072Under NEC 2026, a 50-ampere receptacle used for EVSE connection must meet which requirement?
- 10073Under NEC 2026, may a 50-ampere receptacle for EVSE be installed on a 40-ampere branch circuit as 210.24 would otherwise allow?
- 10074NEC 2026 introduced a new article covering electric vehicle power transfer equipment for vehicles that are not on-road vehicles. Which article number is it?
- 10076The OCPD for a fire pump motor must be sized to carry what current indefinitely?
- 10078Under NEC 2026, fire pump supply and control conductors inside a building protected by concrete encasement require at least how much concrete?
- 10083A transformer arc welder has a rated primary current of 50 amperes and a 50 percent duty cycle. The I1eff value is not marked. Using a duty cycle multiplier of 0.71, what is the minimum supply conductor ampacity?